Tube Amp Archive

Here are a couple pics. The first one I didn't have the cap installed on the presence pot yet.



[img768]http://s287.photobucket.com/albums/ll13 ... G_0809.jpg[/img]
[img768]http://s287.photobucket.com/albums/ll13 ... G_0812.jpg[/img]

After working a few evenings I finished all my wiring and then went back over the layout/schem several time to make sure I hadn't forgot anything. I did all of the voltage tests and was happy mine were +/- 2 volts on the higher voltage stuff or right on the money. I was apprehensive when plugging in...

For the 6.3 VAC on the heaters...I should be measuring across both pins that the heaters are wired to?

That sounds really cool. Would you be willing to post a little layout on how you did it. It sounds like it would be a neat simple mod to try out.

Well after doing a lot more reading you guys have convinced me to go with a standard build I will be building an air brake and just using that for certain situations and I have a few other amps that will benefit from it. Thanks for all of the opinions and help.

Brian

I actually have all of those layouts, but the dizzy 30 has the MV hooked up differently than the type 2 in the layout that was posted seperately. I just need to figure out how to hook the cut control to the type 2 MV. I read a post where someone said it was a easy addition and it sounds like it woul...

First post here...I have been reading threads on here and doing serches for weeks and have ordered a kit from Nik minus trannies. I will be getting them from Moose. I have the schematics/layouts I will use but the main question I have is I am going to install a type 2 PPIMV (Don't hit me) but the on...