Tube Amp Archive

Allynmey wrote:try http://www.apexjr.com/wire.html

Thanks. I wish you could order online.

HeeBGB wrote:I have used RCA patch cables in a pinch. I think Radio Shack has 'em in singles for video applications. Just snip the ends off and go!

I'm looking for about 25-50' of it in 22awg to handle amp voltages...

Andy Le Blanc wrote:guitar patch cord is around that...... may be 30- 40 pf a foot
whats the application?

I want to use it within guitar amps for shielding. Guitar cable is a little too thick for that app.

Anyone?

guitarsnguns04 wrote:I have about 50' of 2 conducter shielded. I can fix you up if you still need it pm me.

Thanks. I ended up finding some. Anyone know of a source for foil shield single conductor 22 awg wire?

Thanks for the advice. The situation is that I currently have a nice plexiclone and then ran into an opportunity to pickup an identical one very cheaply. So, I figured if I could get one to have some of the brilliance of the matchless type amps with less power, it might be worth having 2 of them. I'...

Just wondering if it's worth trying to do this.

It's got a SS rectifier and I'm measuring around 450V on the plates. I'm willing to replace the OT if necessary.

Looking for some to do the larmar PPIMV mod. This wire seems impossible to find unless you buy in quantities of 500' or more. Anyone know where I can score 10' of it?

Thanks! You guys are great and very helpful!

There might be on the jtm45 yahoo group. If there's not, I can pull one together for you. You really want to switch the NFB too... as it will be too high for a plexi (meaning less gain) if you want to do this right. If you do all three, you will have a decent plexi sound. A switch for a solid state...

Thanks Mickey, You have a diagram of that for amp-dummies like myself? The way the switch is currently wired (DPDT) channel 2 doesn't work in plexi mode! A SPDT switch will work, if that's all you're doing. Disconnect the jumper on V1 pin 8 to pin 3. Connect the SPDT common to pin 8 of V1. Run a wir...

What's the best switch configuration to be able to go from a JTM-45 style 250uF/820 shared cathode to .68uf/2.7k & .68 on V1?

Brad737 wrote:Hi guys,
Do we know which Fender trannies Mr. Dumble preferred with his ODS?
Thanks,
Brad

Fender Twin from what I recall.

clips? I have no problems getting "toothy" cleans with mine using the updated layout I did based on Gil Ayan's and Scott Lerner's tweaks. My problem is that the clean is peaky. This is true of the Fuchs as well so I suspect it's inherent to the design. Two rock has a sweeter clean but their OD sound...

Jack, After hearing your "mods done" clip, I agree that the upgrade is probably not needed. Truth is, I don't know how to judge a transformer, but I was going on the perhaps misguided assumption that Nik may not have put the best ones in to keep the cost of the amps down (no offense to Nik). One of...