Tube Amp Archive

Thanks groovtubin.
Aharon

Hi,whats the value of the cap in the bridge?
Thanks
Aharon

You guys are top notch,thanks a million.The build is going well,I'm approaching the stage were I have to lace everything up,most of the prep work is done.
Thanks again...
Aharon

http://brownnote.net/shared/images/D-Lite%20Layout%20with%20RelaysV3.jpg This is the layout I'm following,I have a couple of questions: First,I don't have a bias tap (I'm using a Hammond 272DX) so I'm guessing that changing the bias supply resistor from 470 ohm to 220K will take care of that (if I t...

Thanks for the heads up guys.
My chassie is not not the standard kit chassie,im afraid my amp will be sort of a love child,not for purists but the heart is in the right place.
Wont be using the OT switch but might get the loop going.
Thanks again
Aharon

Thanks for the welcome Teleguy61 and martin manning,it sure has been a long time.
Thanks for the links , I will probably will just run 6V6s.
Got most of the metalwork done on the chassie,i have to make the bias and recto boards.
Thanks a lot again.
Aharon

Hi everybody,I'm a member of the forums since at least 1999 but I had to take a break around 2007.Long story short,found the box containing all my amp stuff,built a quick Booger 2020 to get the mojo back and now ,since I had 98% of the parts and boards stuffed,want to finish the D'lite.I have a Hamm...

Here's one

http://www.brownnote.net/forum/viewtopi ... 7b22d470ee

Aharon

Metal window mesh should work and you can staple it to the wood,just make sure all sides are in contact.
Not my idea,I read it somewhere I just don't remember where.
Aharon

Yeah,I tried with a 56R yesterday and it dropped enough voltage that I think the 5V relay would be happy,you pointed me to that value,thank you.
Aharon

I started this debate by asking what the value of "R" would be for the non regulated PS. Deric was gracious enough to give me the value of 30R that he used for 3 relays. I was going to use 2 relays so I needed to adjust it,my Ohms law was a little rusty or I was lazy to look and I asked. All this ca...

I think I'm going with the regulator PS........I was trying to save a little PCB I made but I'm being retarded when I have all the rest of the amp built I'm not going to cheap out at the last minute.

I'll just perf the new PS and be done with it.
Thanks
Aharon

Thanks guys for helping me.
I just rigged a mess o' wires with some alligator clips and tested it with a 9V battery and the foot pedal I just finished.....the result using a 56R was a drop of about 6V......
Should be ok.........
Aharon

I stand corrected .......thanks. I'm working off these plans (scroll to the OD/PAB 2 relay schem) http://www.brownnote.net/forum/viewtopic.php?t=479 maybe somebody can explain how the power will stay at 7.5V or less,basically I'm at a loss for the value of R in the schem,I went through hell to get t...

Ok I just looked at the datasheet for the relays and (that's what I should've done in the first place)it says the coil is rated from 3V to 48V (if I read correctly)so I don't have to worry about blowing them by not using a regulator.
Thanks
Aharon