Thanks all for your replies and help - I will try the probe troubleshooting this weekend if I have time and see if I can figure it out.
Thanks again,
Warren
Search found 3 matches
- Tue Mar 15, 2011 1:14 am
- Forum: Technical Discussion
- Topic: No sound - no hum - no good - please help
- Replies: 7
- Views: 1913
- Mon Mar 14, 2011 12:11 am
- Forum: Technical Discussion
- Topic: No sound - no hum - no good - please help
- Replies: 7
- Views: 1913
Re: No sound - no hum - no good - please help
Here is what I have for readings and thanks for your reply. Primary - anode to anode = 89 ohms CT to anode #1 = 40 ohms CT to anode #2 = 48 ohms Secondary - ground to 16 ohm tap = 1 ohm ground to 8 ohm tap = .7 ohm ground to 4 ohm tap = .4 ohm I have no shorts between primary and secondary windings....
- Sun Mar 13, 2011 2:05 pm
- Forum: Technical Discussion
- Topic: No sound - no hum - no good - please help
- Replies: 7
- Views: 1913
No sound - no hum - no good - please help
I am building a ceriatone 36w EF86 (uses 4 EL84 in power amp) using Shinrock trannies and I am getting no sound - no hum either. Does anyone have a way to check the OT to see if it is defective - I fear the primary leads may have been colored wrong. I had the red wire as center tap on the primary. B...