Tube Amp Archive

Since the days of de-gooping and non approved HAD service, there should be loads of info out there in the market already ...just judging by the currently available amps in the commercial market, this should prove this.

I agree that his IP should be kept to his wishes upon his passing.

A great option also is the Scumback M75 65LD. It's a great speaker in and ODS styled amp.

I believe that Robben sold one of the Dumbles a while back.

Yes. Separate the snubbers. They are out of phase. There should be a gap between them. Interesting topic for sure! I built my OTS as a kit from Ceriatone. It's the FM50 ME mod. And I basically followed the lead dress of the Flckr photos that are posted for helping those of us during the build. This...

I really have to say this ...I have learnt so much from following discussions like these! I really appreciate all the input from those of you with a wealth of knowledge that are willing to pass along to those of us who are hungry for knowledge. Thank you all again!

Interesting topic for sure! I built my OTS as a kit from Ceriatone. It's the FM50 ME mod. And I basically followed the lead dress of the Flckr photos that are posted for helping those of us during the build. This is my V2 lead dress, how does it look? Should I make any changes with the plate/grid la...

neskor wrote: ↑Wed Apr 14, 2021 3:50 pm yes, it have LNFB
you can make a switch for that

Agreed ... especially if you go between single coil guitars and Humbucker guitars. I find that the 'tightness' that the LNFB brings to the table can thin out Single coils. Ymmv

Real nice project! Following this one for sure! Keep up the great work!

Sometime this weekend, I'll put in the ground bus bar and lay down some of the coax. If you haven't gotten to the ground/buss bar or wiring the control panel switches and pots, this is what I did. I installed the pots on the outside of the chassis, and wired them all up. The access was much better ...

Wow ...what is it with people saying that Ceriatone doesn't give 'support' for their products? I've had several interactions with Nik, some for products I've purchased, and for other inquiries/questions relating to hear advice. He ALWAYS had time to respond with good intentions ... regardless of him...

Anyone has a layout for the switch, and where it is placed in circuit?

Sounds great! Very smooth! What guitar/specs is the rig? Speakers, pickups, etc?

When I received my Ceriatone OTS FM50 ME kit, I studied the layout, schematic drawings and some hi-res photos of an example build for a few days before embarking on the build. I decided to copy the lead dress exactly as observed in the photos. I am convinced that this is the quietest amp that I have...

Is the C-tone amp's master before the loop send as in the typical ODS arrangement? If so, where i that set? Maybe you are overdriving the TC Drip. The first knob on the left(Drive) is the signal into the FX send. I backed this right down and it made no difference. Thanks for the advise. Weird that ...

I have a Ceriatone OTS FM50 ME and a C-Lator in the FX loop. I am currently using both a TC Electonic Drip for Reverb, then a Xvive Memory Delay(in that order) in the C-LATOR FX send. I prefer the amps drive sound with my Reverb/Delay in the loop. The only issue I'm having is that there are definit...