Search found 25 matches
- Fri Mar 08, 2013 4:54 am
- Forum: Technical Discussion
- Topic: getting ready for a 5e3 2nd build
- Replies: 3
- Views: 913
- Fri Mar 08, 2013 4:53 am
- Forum: Technical Discussion
- Topic: New builder question about center tap and two 100 ohm res.
- Replies: 1
- Views: 579
Re: New builder question about center tap and two 100 ohm res.
never mind. I found it. i was looking at it wrong.
- Fri Mar 08, 2013 4:20 am
- Forum: Technical Discussion
- Topic: New builder question about center tap and two 100 ohm res.
- Replies: 1
- Views: 579
New builder question about center tap and two 100 ohm res.
If you use two 100 ohm resistors as your heater center tap, do not use the power transformer heater center tap wire and visa versa
What is the reason for this i done this on my champ when i build it because the mojotone layout had it on there. and it is very quite. will this hurt anything?
What is the reason for this i done this on my champ when i build it because the mojotone layout had it on there. and it is very quite. will this hurt anything?
- Fri Mar 08, 2013 2:46 am
- Forum: Technical Discussion
- Topic: getting ready for a 5e3 2nd build
- Replies: 3
- Views: 913
- Thu Mar 07, 2013 1:27 pm
- Forum: Technical Discussion
- Topic: getting ready for a 5e3 2nd build
- Replies: 3
- Views: 913
getting ready for a 5e3 2nd build
Getting ready to build a 5e3 as my second build. My first was a champ and turned out great. Is there anything that I need to specificaly pay attention to that will be different from a champ or any tips will be greatly appreciated. Also what is the best grounding scheme. On the 5f1 I put all the prea...
- Sat Feb 09, 2013 7:01 pm
- Forum: Technical Discussion
- Topic: The best value bypass cap on a champ style amp.
- Replies: 20
- Views: 4816
Re: The best value bypass cap on a champ style amp.
oh sorry. V1 cathode bypass cap on a champ
- Sat Feb 09, 2013 3:41 pm
- Forum: Technical Discussion
- Topic: The best value bypass cap on a champ style amp.
- Replies: 20
- Views: 4816
Re: The best value bypass cap on a champ style amp.
i have put a 25uf and i like it. i just couldn't get a 50v at the time so i put a 25v in at the time and i was just wondering if i should change it out or just keep it in there
- Sat Feb 09, 2013 2:40 pm
- Forum: Technical Discussion
- Topic: The best value bypass cap on a champ style amp.
- Replies: 20
- Views: 4816
Re: The best value bypass cap on a champ style amp.
is a 25volt alright to use or do you need a 50volt?
- Fri Feb 08, 2013 2:39 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
Re: First build. need a little help please.
Any tips? Yes, one on each jack! LOL, the 1/4" phone plug is said to have tip and sleeve. The tip is the active wire. The sleeve is grounded. Which type of jack have you got? The Switchcraft type (upper) or Cliffs/Rean type (lower)? When you say the jack doesn't work, can you say any more? When you...
- Thu Feb 07, 2013 7:37 pm
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
- Thu Feb 07, 2013 5:39 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
Re: First build. need a little help please.
Thanks to all i finished it. and it works and very quiet. The only thing is input 1 jack doesn't work but input 2 works i can sort that out sounds great so much harmonics..... i think i'm hooked moving on to a 5e3 after i get the jacks working right and find out where i went wrong. Thanks again!
- Thu Feb 07, 2013 3:09 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
Re: First build. need a little help please.
I just pulled up the Mojo 5F1 assembly manual. The PT has the following wires: 2 black -- these are the primary connections to the 120VAC wall supply. Red-Red/Yellow-Red -- these are the high voltage secondary; ground the Red/Yellow as it is the center tap. The red wires go to pins 4 and 6 on the 5...
- Thu Feb 07, 2013 2:35 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
Re: First build. need a little help please.
so it's fine to solder it to the ground rail right?
- Thu Feb 07, 2013 2:02 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
Re: First build. need a little help please.
the schematic showing it going into a 100ohm resistor on the same rail as the heaters
- Thu Feb 07, 2013 1:49 am
- Forum: Technical Discussion
- Topic: First build. need a little help please.
- Replies: 15
- Views: 2888
First build. need a little help please.
building a 5f1 my first build ever. where does the 5 vac center tap red/yellow wire go from the power tranny. It's a mojo kit. Thanks!